Applicable Die Casting Machine Tons: 350T

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 150mm

Rotating spraying range of atomizer seat: 18° for each

Major Spray Module: 3 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 14 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.

Applicable Die Casting Machine Tons: 500T

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 150mm

Rotating spraying range of atomizer seat: 18° for each

Major Spray Module: 3 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 18 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.

Applicable Die Casting Machine Tons: 650T-BD

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 280mm

Rotating spraying range of atomizer seat: 21° for each

Major Spray Module: 5 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 18 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1-1/2 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.

Applicable Die Casting Machine Tons: 650T-DC

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 280mm

Rotating spraying range of atomizer seat: 21° for each

Major Spray Module: 5 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 18 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1-1/2 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.

Applicable Die Casting Machine Tons: 800T-BD

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 280mm

Rotating spraying range of atomizer seat: 21° for each

Major Spray Module: 5 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 18 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1-1/2 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.

Applicable Die Casting Machine Tons: 800T-DC

Control Mode: servo drive, programmable spraying mode.

Front & Rear Travel Adjustment: 280mm

Rotating spraying range of atomizer seat: 21° for each

Major Spray Module: 5 sets of movable mold and fixed mold (1 set is with 11pcs of Φ4mm-copper-tube.) can spray with release agent or water.

Auxiliary Spray Module: 1 set of left, center and right (1 set is with 9pcs Φ4mm-copper-tubes) can spray with release agent or water and free rotation angle.

Mold Cleaning Air Nozzle: 18 pcs (reserved teeth for additional copper tubes)

Sprayer Voltage: 3Φ AC 220V (transformer can be installed.)

Wind Source Specification of Inlet: 1-1/2 inch air pipe↑, suction pressure 6.5Kg/cm^2 ↑.